Specs:600 Watts Max Power per pair / 300 Watts each200 Watts RMS Power per pair / 100 Watts eachImpedance: 4 Ohm each tweeterSensitivity: 105 dBFrequency Response: 2,000 – 23,000HzAluminum Diaphragm with a 1″ voice coilRecommended High Pass Filter on TPT-SP4BT DSP, Based on Power per Tweeter7500 Hz under 150 Watts of Amplifier RMS Power with 18dB Slope6000 Hz under 100 Watts of Amplifier RMS Power with 12dB SlopeSizing:Mounting Depth: 1.39”Mounting Cutout Diameter: 2.87″ + TerminalsOverall Size: 3.85′ diameter x 1.75″ HeightWeight: 1.32 Lbs each tweeter

Leer Más Menos

GENERAL SPECIFICATIONS Number of processors (DSPs) 1 Input Channels 2 Output Channels 4 Output Gain Yes Master Level 0 ~ 100% Graphic Equalizer 15 Band Graphic Equalizer Presets 12 Parametric Equalizer Input 1 Parametric Equalizer Output 4 / 1 per Channel Routing A,B / A+B Crossover Butterworth (dB/8ª) 12/18/24/36/48 Crossover Linkwitz-Riley (dB/8ª) 12/18/24/36/48 Limiter Yes Automatic Attack/Release Yes Delay 0 to 8 ms (275 cm) Frequency Generator 10Hz – 22kHz, Level -60 at 0dB Frequency Scan 10Hz – 22kHz / Level -60 at 0dB / Control of speed Display LCD16x2 Characters Screen Saver Text Security Password Yes Frequency Response(+/-3dB) 10Hz @ 22.5kHz @ -1dB Latency 1.08ms Signal to Noise >90dB THD <0,01% Channel Separation > 80 dB Maximum Input Voltage 5,6 Vpp (+8,2 dBu) Maximum Output Voltage 5,6 Vpp (+8,2 dBu) Supply Voltage 9V to 16V DC Dimensions (HxWxL) 1.45″ x 7.87″ x 3.97″ Weight 1 Lbs

Leer Más Menos

GENERAL SPECIFICATIONS Exit Throat Diameter 1” (25.4mm) Nominal impedance 8 Ohms Nominal Power Handling 75 Watts Continuous Program Power (RMS) 150Watts Peak Power 300 Watts Sensitivity 2.83V at 1m 108 dB Recommended Hi Pass Crossover** **For Full Power Handling 3000 Hz** **12db Per Octave Crossover Frequency Response at -10dB 1,300 – 16,000 Hz Voice Coil Diameter 1″ (25.4 mm) Voice Coil Wire CCAW Voice Coil Former Material Kapton Diaphragm Material Phenolic Resin Flux Density 1.02 T Magnet Material Ferrite

Leer Más Menos

GENERAL SPECIFICATIONS Nominal Diameter 12″ (305 mm) Nominal impedance 8 Ohm Nominal Power Handling* 750 Watts Continuous Program Power (RMS)** 1500 Watts Max Peak Power*** 3000 Watts Sensitivity 2.83V at 1m 98.5 dB Recommended Hi Pass CrossoverFor Full Power Handling 90 Hz12db Per Octave Crossover Frequency Response 75 – 5,000 Hz Voice Coil Diameter 3.5″ (89 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 17.0 mm Former Material Glass Fiber Magnetic Gap Depth 10.0 mm Frame Material Die Cast Aluminum

Leer Más Menos

Description The Taramps HD 3000 is a 1 Ohm, single-channel amplifier capable of delivering 3000 Watts RMS of power. It is compatible with all types of speakers, drivers and tweeters. * This product comes with an M1 LED Monitor

Leer Más Menos

GENERAL SPECIFICATIONS Impedance 1 Ohm or 2 Ohm Channels 1 Channel Rated RMS Power at 14.0 V at 1 Ohm 3000 Watts Rated RMS Power at 14.0 V at 2 Ohms 2100 Watts Average Efficiency 76% Operating Voltage 9 to 16 Volts Musical Current Draw 155 A Minimum Power Wire Input (OFC) 4 Gauge Protection Fuse or Circuit Breaker 150 Amps Minimum Speaker Wire Output 14 Gauge Frequency Response(-3dB) 20 – 20,000 Hz Min. Input Sensitivity for Max. Output 200 mV Signal Input 1 Pair RCA Signal to Noise >90 dB Protection System Low & High Supply Voltage / Shortage on Output / Low Impedance on Output Heat Sink Type Heavy Duty Cast Aluminum Dimensions ( W x D x H ) 7.30″ x 8.66″ x 3.00″ Weight 5.10 Lbs

Leer Más Menos