Description
The MD 5000.1 was carefully designed with the latest technology, offering high performance and efficiency for various types of car audio systems. Its wide frequency response (10Hz ~ 10KHz (-3dB), allows it to be used with subwoofers and woofers of different models. It is an amplifier classified as mono, that is, it has a channel with a maximum power of 5000 Watts RMS. The power you’re looking for, it’s here!
Description
The DS800X2 was designed for anyone who likes to enjoy all frequency ranges with high definition and technology for car audio systems. It is stereo, with a maximum power of 800 Watts RMS and an impedance of 2 Ohms. It has 2 channels of 400 Watts RMS each, or 1 channel connected in BRIDGE with 800 Watts at 4 ohms. The DS 800X2 is FULL RANGE and will certainly play all frequencies the way you like it most.
Description
The Pro 2.4S is a 4-channel digital audio processor. Designed with the highest technology, it offers vital features and adjustments for car audio, such as: crossover with multiple filters, 15-band graphic equalization, 12 pre-defined equalizations, parametric equalization, alignment, routing, phase inversion, limiter, input and output clip indicator, remote signal output to activate amplifiers, audio generator, among many others. In addition, it features an audio input via RCA and also a high level input, allowing use with conventional and original head units (eg multimedia without RCA output). Another advantage of this product is the anti-puff system, which prevents those infamous pops when turning the sound on and off. All this and much more to keep your sound system always tuned, aligned and with the quality you deserve.
Technical information
Número de canais de entrada
2 stereo
Número de canais de saída
3 stereo
Ajuste de ganho geral
Main: -13 a +8 dBAux: -13 a +8 dB
Output impedance
100 Ohms
Maximum output level
28.28Vpp (10 VRMS)
Resposta de frequência (-1dB)
6Hz ~ 55KHz
Total Harmonic Distortion
0,01%
Relação Sinal / Ruído
>100 dB
Crosstalk (separation between channels)
>80dB / 1 KHz
Equalizador gráfico, 7 bandas
Frequencies: 50, 125, 315, 750, 2.2K, 6K, 12KHz
Power Supply Voltage
9 ~ 15 VDC
Consumo nominal (12,6V)
(14,4): 0.270 A
Dimensões(LxAxP)
185x31x138mm (7.28"x1.22"x5.43")
Technical information
2 Ohms VERSION
Nominal Power @14.4VDC2 Ohms: 800W RMS (4 x 200W RMS)4 Ohms: 544W RMS (4 x 136W RMS)2 Bridged Channels4 Ohms: 800 W RMS (2 x 400W RMS)
Number of Channels
04
Input Sensitivity
(RCA): 4V (min.) / 250mV (max.)(WIRE): >10V (min.) / 3V (max.)
Signal to Noise Ratio
>90dB
Frequency Response
10Hz ~ 20KHz (-3dB)
Crossover high pass (HPF)
90Hz (-12dB/8ª) Fixed
Crossover low pass (LPF)
90Hz (-12dB/8ª) Fixed
Input Impedance
10K Ohms (RCA)
Output Impedance
2 Ohms
protection system
Output Short Circuit
Minimum Supply Voltage
9VDC
Maximum Supply Voltage
16VDC
Consumption at rest
0.9A
Maximum music consumption
38A
Maximum consumption in sinusoidal signal
76A
Dimensions (WxHxD)
5.43" x 1.89" x 6.89" (138 x 48 x 175mm)
Weight
1.91lb (0.87Kg)
EAN
7898556849043
Description
The TS 400×4 is designed with the highest performance to suit most types of car audio systems. It is multichannel, with 4 channels of 100 Watts RMS, with a maximum power of 400 Watts RMS at 2 Ohms. The TS 400×4 is a FULL RANGE amplifier. It features thermal and short-circuit protection, plus LED indicator and crossover.
Description
The Taramps MD 3000.1 in the 1 Ohm version has been carefully designed with the highest technology, offering high efficiency and performance for various types of car audio systems. This amplifier covers the whole frequency range, that is to say that it is a FULL RANGE module. It is classified as mono and has a channel with a maximum power of 3000-Watts RMS. Welcome to Taramps audio world.
Description
The Taramps HD 3000 is a 1 Ohm, single-channel amplifier capable of delivering 3000 Watts RMS of power. It is compatible with all types of speakers, drivers and tweeters.
* This product comes with an M1 LED Monitor
Technical information
2 Ohms VERSION
Nominal Power @14.4VDC2 Ohms: 1200W RMS (4 x 300W RMS)4 Ohms: 740W RMS (4 x 185W RMS)2 Bridged Channels4 Ohms: 1200 W RMS (2 x 600W RMS)
Number of Channels
4
Input Sensitivity
(RCA) - 4V (min.) / 250mV (max.)(WIRE) - >10V (min.) / 3V (max.)
Signal to Noise Ratio
>90dB
Frequency Response
(FULL RANGE) - 8Hz ~ 25KHz (-3dB)
Crossover high pass (HPF)
90Hz (-12dB/8ª) Fixed
Crossover low pass (LPF)
90Hz (-12dB/8ª) Fixed
Input Impedance
10K Ohms (RCA)
Minimum Supply Voltage
9VDC
Maximum Supply Voltage
16VDC
Consumption at rest
0.9A
Maximum music consumption
55A
Dimensions (WxHxD)
5.43" x 1.89" x 9.84" (138 x 48 x 250 mm)
Weight
2.73 lb (1.24 Kg)
