Cover de guías bordado 

Read more less

Descripción Este separador de frecuencias (crossover) electrónico de 3 vías ofrece entradas para sistemas de 2 o 3 vías con control de desvanecimiento de audio posterior. Los usuarios también podrán tener un control remoto con cable para el control de nivel de subwoofer. 2/4/6 canales de entrada 6 canales de salida RCA a 5 voltios (frontal, trasera, subwoofer) Control de nivel de frontales, traseras y subwoofer Control de nivel de ecualizador y potenciador de graves del subwoofer Separador de paso de frecuencias altas (high pass crossover) y multiplicador de frecuencia Control remoto de nivel de subwoofer incluido

Read more less

2/3/4 RCA Input Signal Options 9 Volts RMS maximum output Bass Boost 0 to 12dB set at 45Hz Quick On/Off button for each channel Crossover slope rate: Butterworth 12 db/Octave   Input and output Functions:– 2/3/4 RCA inputs for 3 Channels – 1 Stereo and 2 Mono– 6 RCA outputs for 4 Channels – 2 Stereo and 2 Mono Crossover Functions:– High Pass Filter allows adjustment:It determines the beginning of the channel operating frequency.This filter allows the amplifier to work with many different applications such as: Woofer / Midbass / Midrange / Compression Driver components allows the elimination of low frequency sounds, delivering the right frequency range to avoid damage to the components.– Low Pass Filter allows adjustment:It determines the end of the channel operating frequency.This filter allows you to fine tune the amplifier frequency response to match to the components’ frequency response. This ensures that only the lowest frequencies are reproduced by the amplifier.– Bass Boost allows adjustment:Bass Equalizer: provides a “gain attenuation” 0 to + 12dB at center frequency of 45Hz .– On/Off Buttons:This button allows to quick turn On and Off each individual channel.– Level knobs:This control adjusts the output signal on channel; which allows an optimal adjustment to the output signal levels to the amplifiers.  

Read more less

2″ (51mm) Midrange Voice Coil Neodymium Ring Magnet Assembly Rear Mounted Full Sized Compression Driver IP52 Rateed Paper Cone With Treated Cloth Surround Die-Cast Aluminum Basket With Radial Venting 1.4″ (36mm) Polyester Tweeter Diaphragm Wide Dispersion Conical HF Waveguide 12dB Passive Crossover Included Protective Grills Included

Read more less

6.5″ 2-Way Carbon Fiber Loudspeaker 2.0″ (51mm) Midrange Voice Coil 10 Neodymium Ring Magnet Assembly Rear Mounted Full Sized Compression Driver IP54 Rated Weather Resistant Carbon Fiber Cone with Rubber Surround Die-Cast Aluminum Basket with Radial Venting 1.4″(36mm) Polyester Tweeter Diaphragm Wide Dispersion Conical HF Waveguide 12dB Passive Crossover Included Protective Grills Included

Read more less

2″ (51mm) Midrange Voice Coil Neodymium Ring Magnet Assembly IP52 Rateed Paper Cone With Treated Cloth Surround Die-Cast Aluminum Basket With Radial Venting Wide Dispersion 1.25″ (28mm) Aluminum Dome Tweeter Protective Grills Included

Read more less

Specs:450 Watts Max Power150 Watts RMS PowerImpedance: 8 OhmSensitivity: 109 dBFrequency Response: 1,000 – 20,000HzVoice Coil: 2”Titanium Diaphragm with a 2″ voice coilRecommended High Pass Filter:1600 Hz under 225 Watts of Amplifier RMS Power with 18dB Slope1500 Hz under 150 Watts of Amplifier RMS Power with 12dB SlopeSizing:Mounting Depth: 5.08”Mounting Cutout Diameter: 5.75″Overall Size: 6.15″ x 6.15″ x 5.39”Weight: 7.20 Lbs

Read more less

Modelo: D4600TIH-ND  8 ohmios  2” Exit Hybrid Titanium Neodymium Driver 600 watts 

Read more less

SUPERIOR PERFORMANCE: Our 220 Watts Titanium Compression Driver utilizes cutting-edge technology for strong power handling and superior performance. With its high power and smooth response, this driver is perfect for all audio users. HIGH-QUALITY VOICE COIL: This driver is equipped with a high-quality 3” high-temperature Kapton voice coil designed to handle extreme heat while maintaining its structural integrity, ensuring a long lifespan for your driver. TITANIUM DIAPHRAGM: Utilizing a high-performance titanium diaphragm, this driver offers superior sound quality and long-lasting durability, making it an ideal choice for professional audio applications. FLAT ALUMINUM WIRES: Engineered to use flat aluminum wires, this driver provides easy installation, excellent overheat protection and reliable durability while maintaining optimal sound quality. BOLT-ON CONNECTION: This driver features a universal bolt-on connection, making it easier to connect with other horns.  MAGNET: This driver is equipped with a neodymium magnet, delivering powerful and superior sound. PEAK POWER: 250 WATTS (P.M.P.O.) CONTINUOUS POWER: 125 WATTS (R.M.S) FREQUENCY RESPONSE: 500-1,8000 Hz SENSITIVITY: 108 dB THROAT DIAMETER: 2”

Read more less