Description
Taramps proudly presents the MD 8000. Carefully designed with the latest technology, offering high power and performance for the most varied types of car audio systems, covering a wide frequency range, (10Hz ~8KHz (-3dB), being able to output 8000 Watts RMS. Welcome to the sound world of Taramps.
Description
The MD 5000.1 was carefully designed with the latest technology, offering high performance and efficiency for various types of car audio systems. Its wide frequency response (10Hz ~ 10KHz (-3dB), allows it to be used with subwoofers and woofers of different models. It is an amplifier classified as mono, that is, it has a channel with a maximum power of 5000 Watts RMS. The power you’re looking for, it’s here!
GENERAL SPECIFICATIONS
Impedance
2 Ohm
Channels
4 Channel
Rated RMS Power at 14.0 V at 2 Ohm
4x 100 Watts RMS
Rated RMS Power at 14.0 V at 4 Ohm
4x 70 Watts RMS
Bridged Rated RMS Power at 14.0 V at 4 Ohm
2x 200 Watts RMS
Average Efficiency
80%
Operating Voltage
9 to 15 Volts
Musical Current Draw
45 A
Minimal Power Wire Input
(OFC) 8 Gauge wires
Built-in Crossover
Fixed HPF & LPF at 90 Hz
Minimal Speaker Wire Output
14 Gauge
Frequency Response(-3dB)
20 – 25,000 Hz
Min. Input Sensitivity for Max. Output
200 mV
Signal Input
2 Pair RCA
Signal to Noise
>90 dB
Protection System
High Temperature / Short circuit on Output
Heat Sink Type
Heavy Duty Cast Aluminum
Dimensions ( Width x Depth x Height )
4.00″ x 5.40″ x 2.00″
Weight
1.18 Lbs
Description
The DS800X2 was designed for anyone who likes to enjoy all frequency ranges with high definition and technology for car audio systems. It is stereo, with a maximum power of 800 Watts RMS and an impedance of 2 Ohms. It has 2 channels of 400 Watts RMS each, or 1 channel connected in BRIDGE with 800 Watts at 4 ohms. The DS 800X2 is FULL RANGE and will certainly play all frequencies the way you like it most.
Description
The BASS 1200 amplifier is a robust and efficient solution for those looking for excellence in sub-bass and bass frequencies. With 1200 W RMS and available in 1 Ohm, 2 Ohm or 4 Ohm versions, it has a frequency response of 8 Hz to 250 Hz, which makes it ideal for subwoofers. The audio inputs via RCA and WIRE (High Level) guarantee more versatility, allowing use with most players on the market, including original multimedia, without the need for adapters.
Equipped with gain adjustment (0.2 to 4V), crossover with subsonic adjustment from 8 to 30Hz and LPF from 60 to 250Hz, and variable Bass Boost, it allows you to choose the central frequency between 35 and 60Hz and increase the bass by up to 10 dB.
The aluminum frame, combined with the Smart Cooler, ensures efficient heat dissipation and silent operation. In addition, the BASS 1200 comes with the Monitor Level Remote accessory, providing practical, real-time control of the amplifier’s volume. This accessory can be easily attached to the vehicle’s dashboard, within easy reach, and allows you to monitor the amplifier’s operating conditions through the integrated LEDs: On, Clip and Protection.
Experience much more powerful bass with the new BASS 1200 from Taramps.
Description
The BASS 3K has been carefully designed with the highest technology, with high efficiency and performance for car audio systems aimed at sub-bass and bass responses, in the frequency range of 8Hz to 250Hz. It has a maximum power of 3000 Watts in 1 channel of 1 ohm, It features customized adjustments according to the trunk size and the most prominent frequency of each vehicle, through BASS BOOST and the option to choose the central frequency. This amplifier offers much more displacement control, through its SUBSONIC FILTER, volume control and LOW PASS, to get your bass just perfect. Welcome to the audio world by Taramps!
