Description
The MD 5000.1 was carefully designed with the latest technology, offering high performance and efficiency for various types of car audio systems. Its wide frequency response (10Hz ~ 10KHz (-3dB), allows it to be used with subwoofers and woofers of different models. It is an amplifier classified as mono, that is, it has a channel with a maximum power of 5000 Watts RMS. The power you’re looking for, it’s here!
GENERAL SPECIFICATIONS
Impedance
2 Ohm
Channels
4 Channel
Rated RMS Power at 14.0 V at 2 Ohm
4x 100 Watts RMS
Rated RMS Power at 14.0 V at 4 Ohm
4x 70 Watts RMS
Bridged Rated RMS Power at 14.0 V at 4 Ohm
2x 200 Watts RMS
Average Efficiency
80%
Operating Voltage
9 to 15 Volts
Musical Current Draw
45 A
Minimal Power Wire Input
(OFC) 8 Gauge wires
Built-in Crossover
Fixed HPF & LPF at 90 Hz
Minimal Speaker Wire Output
14 Gauge
Frequency Response(-3dB)
20 – 25,000 Hz
Min. Input Sensitivity for Max. Output
200 mV
Signal Input
2 Pair RCA
Signal to Noise
>90 dB
Protection System
High Temperature / Short circuit on Output
Heat Sink Type
Heavy Duty Cast Aluminum
Dimensions ( Width x Depth x Height )
4.00″ x 5.40″ x 2.00″
Weight
1.18 Lbs
Description
The DS800X2 was designed for anyone who likes to enjoy all frequency ranges with high definition and technology for car audio systems. It is stereo, with a maximum power of 800 Watts RMS and an impedance of 2 Ohms. It has 2 channels of 400 Watts RMS each, or 1 channel connected in BRIDGE with 800 Watts at 4 ohms. The DS 800X2 is FULL RANGE and will certainly play all frequencies the way you like it most.
