Funciones Circuitos de clase D de rango completo de 4 canales Capacidad de carga estéreo de 2 Ω  Entradas RCA de bajo nivel  Entradas de alto nivel Crossover seleccionable: HPF/LPF/Full Salidas puenteables @ 4Ω de carga Compatible con cualquier altavoz de 4/1Ω Diseño de mosfet de alta eficiencia Sistema de gestión del calor   Características técnicas 4 x 150 vatios @ 4 Ω estéreo 4 x 300 vatios @ 2 Ω estéreo 2 x 600 vatios @ 4 Ω puenteados Compatibilidad: 2 Ω estéreo THD y potencia nominal <0.5% Ancho de banda (-3 dB) - 18Hz- 22KHz Factor de amortiguación (1k Hz @ 4Ω) - 100 Relación señal/ruido >90dB Sensibilidad de entrada: 285Mv - 6V Pendiente del filtro cruzado en estéreo - 12dB Canal 1-2 Rango de filtros HP - 40Hz - 3KHz Rango de filtro LP canal 1-2 - 40Hz - 3KHz Canal 3-4 Gama de filtros HP - 40Hz - 3KHz Rango de filtro de canal 3-4LP - 40Hz - 3KHz Dimensiones L-6,05 pulgadas (153,7 mm) H-2,33 pulgadas (59,2 mm) W- 5,53 pulgadas (140,5 mm)

Read more less

5 Channel Full Range Class D Amplifier

Read more less

The Quantum QEA500.4, QEA800.4, QEA800.2 are equiped with a built in variable crossover network allowing you to select the crossover function and frequency for each the front channels or rear channels of the amplifier independently. Class A/B Circuitry 2 Ohm Load Stereo Capability Audiophile Grade Components Variable Low/ High Pass Crossover High Efficiency Mosfet Design QSINK Heat Management System

Read more less

Technical information 2 Ohms VERSION Nominal Power @14.4VDC2 Ohms: 800W RMS (4 x 200W RMS)4 Ohms: 544W RMS (4 x 136W RMS)2 Bridged Channels4 Ohms: 800 W RMS (2 x 400W RMS) Number of Channels 04 Input Sensitivity (RCA): 4V (min.) / 250mV (max.)(WIRE): >10V (min.) / 3V (max.) Signal to Noise Ratio >90dB Frequency Response 10Hz ~ 20KHz (-3dB) Crossover high pass (HPF) 90Hz (-12dB/8ª) Fixed Crossover low pass (LPF) 90Hz (-12dB/8ª) Fixed Input Impedance 10K Ohms (RCA) Output Impedance 2 Ohms protection system Output Short Circuit Minimum Supply Voltage 9VDC Maximum Supply Voltage 16VDC Consumption at rest 0.9A Maximum music consumption 38A Maximum consumption in sinusoidal signal 76A Dimensions (WxHxD) 5.43" x 1.89" x 6.89" (138 x 48 x 175mm) Weight 1.91lb (0.87Kg) EAN 7898556849043

Read more less

Description The TS 400×4 is designed with the highest performance to suit most types of car audio systems. It is multichannel, with 4 channels of 100 Watts RMS, with a maximum power of 400 Watts RMS at 2 Ohms. The TS 400×4 is a FULL RANGE amplifier. It features thermal and short-circuit protection, plus LED indicator and crossover.

Read more less

Description The Taramps MD 3000.1 in the 1 Ohm version has been carefully designed with the highest technology, offering high efficiency and performance for various types of car audio systems. This amplifier covers the whole frequency range, that is to say that it is a FULL RANGE module. It is classified as mono and has a channel with a maximum power of 3000-Watts RMS. Welcome to Taramps audio world.  

Read more less

Description The Taramps HD 3000 is a 1 Ohm, single-channel amplifier capable of delivering 3000 Watts RMS of power. It is compatible with all types of speakers, drivers and tweeters. * This product comes with an M1 LED Monitor

Read more less

Technical information 2 Ohms VERSION Nominal Power @14.4VDC2 Ohms: 1200W RMS (4 x 300W RMS)4 Ohms: 740W RMS (4 x 185W RMS)2 Bridged Channels4 Ohms: 1200 W RMS (2 x 600W RMS) Number of Channels 4 Input Sensitivity (RCA) - 4V (min.) / 250mV (max.)(WIRE) - >10V (min.) / 3V (max.) Signal to Noise Ratio >90dB Frequency Response (FULL RANGE) - 8Hz ~ 25KHz (-3dB) Crossover high pass (HPF) 90Hz (-12dB/8ª) Fixed Crossover low pass (LPF) 90Hz (-12dB/8ª) Fixed Input Impedance 10K Ohms (RCA) Minimum Supply Voltage 9VDC Maximum Supply Voltage 16VDC Consumption at rest 0.9A Maximum music consumption 55A Dimensions (WxHxD) 5.43" x 1.89" x 9.84" (138 x 48 x 250 mm) Weight 2.73 lb (1.24 Kg)

Read more less

GENERAL SPECIFICATIONS Impedance 2 Ohm Channels 4 Channel Rated RMS Power at 14.0 V at 2 Ohm 4x 220 Watts RMS Rated RMS Power at 14.0 V at 4 Ohm 4x 140 Watts RMS Bridged Rated RMS Power at 14.0 V at 4 Ohm 2x 450 Watts RMS Average Efficiency 82% Operating Voltage 9 to 15 Volts Musical Current Draw 45 A Minimal Power Wire Input (OFC) 4 Gauge wires Built-in Crossover Fixed HPF & LPF at 90 Hz Minimal Speaker Wire Output 14 Gauge Frequency Response(-3dB) 20 – 25,000 Hz Min. Input Sensitivity for Max. Output 200 mV Signal Input 2 Pair RCA Signal to Noise >90 dB Protection System High Temperature / Short circuit on Output Heat Sink Type Heavy Duty Cast Aluminum Dimensions ( Width x Depth x Height ) 7.90″ x 8.00″ x 2.65″ Weight 3.80 Lbs  

Read more less

GENERAL SPECIFICATIONS Impedance 1 Ohm or 2 Ohm Channels 1 Channel Rated RMS Power at 14.0 V at 1 Ohm 3000 Watts Rated RMS Power at 14.0 V at 2 Ohms 2100 Watts Average Efficiency 76% Operating Voltage 9 to 16 Volts Musical Current Draw 155 A Minimum Power Wire Input (OFC) 4 Gauge Protection Fuse or Circuit Breaker 150 Amps Minimum Speaker Wire Output 14 Gauge Frequency Response(-3dB) 20 – 20,000 Hz Min. Input Sensitivity for Max. Output 200 mV Signal Input 1 Pair RCA Signal to Noise >90 dB Protection System Low & High Supply Voltage / Shortage on Output / Low Impedance on Output Heat Sink Type Heavy Duty Cast Aluminum Dimensions ( W x D x H ) 7.30″ x 8.66″ x 3.00″ Weight 5.10 Lbs

Read more less

GENERAL SPECIFICATIONS Impedance 2 Ohm or 1 Ohm Channels 1 Channel Rated RMS Power at 14.0 V at 2 Ohm 2000 Watts Rated RMS Power at 14.0 V at 4 Ohms 1500 Watts Average Efficiency 81% Operating Voltage 9 to 16 Volts Musical Current Draw 105 A Minimum Power Wire Input (OFC) 4 Gauge Protection Fuse or Circuit Breaker 150 Amps Minimum Speaker Wire Output 14 Gauge Frequency Response(-3dB) 20 – 20,000 Hz Min. Input Sensitivity for Max. Output 200 mV Signal Input 1 Pair RCA Signal to Noise >90 dB Protection System Low & High Supply Voltage / Shortage on Output / Low Impedance on Output Heat Sink Type Heavy Duty Cast Aluminum Dimensions (W x D x H) 7.40″ x 8.66″ x 3.00″ Weight 4.80 Lbs

Read more less